Brick facade

Refractory brick and Kazakh brick (traditional brick) that you can use in the interior and exterior of your building and villa, which is very resistant and high quality, and never goes out of fashion and is always beautiful.

What is a refractory brick facade?

It is one of the types of brick models used in the construction industry. Refractory bricks produced by Brick facade Pars Company are prepared and produced from the best types of refractory stones from various quality mines of the country in different colors, and after being crushed and combined with special materials, they are molded by fully automatic presses and at a temperature between 1200 and It is baked at 1400 degrees Celsius.

Due to the resistance that is created in the brick, Pars fireproof facade brick is one of the best options for dear public and private employers for the facade of buildings under construction. Design companies, using experienced people and up-to-date design software, usually use Pars refractory bricks in the facades and lobbies of the building along with stone and provide very beautiful facades to their employers.

In the designs, red refractory bricks are used alone in the facade of the building, which is unique in its kind.

Advantages of brick facade، produced by Brick facade Pars Company

Due to the use of refractory stone in the production of refractory bricks, there will be no color change or dandruff in the bricks, and you will experience a stylish and beautiful appearance with Pars facade bricks for years and you will introduce us to our dear colleagues.

The wide variety of refractory bricks gives a special, eye-catching and unique look to any building. Our pride is that the beauty, quality and durability of firebricks produced by Ajarnama Pars will be effective in attracting you to build beautiful and special buildings.

There are many benefits of using Pars refractory bricks in your facade, some of which we will mention below:

Due to the long baking time, the color range except blue is available in every color, and finally, at the end of the execution of the facade of the building, you will see a wonderful view. In red fireproof brick, when fixing bricks with glue or cement mortar, because the type of brick is made of refractory stone, it will be extremely high and will never be separated from the facade of the building.

The firebrick itself is a great insulator and is a good protection for the building against the air temperature in the cold and heat. Plaque facing bricks are produced in various colors and are used to cover the surface of the interior and exterior as well as vertical installation at the bottom and top of the executive facade and columns.

By using the refractory brick of Ajr Nama Pars company, you simultaneously cover the main surface and the side surface of the desired area and sometimes around the columns, hence it is a suitable option for use on the surface of the facade, gutters, as well as the sides of windows and columns. you will have Realize your creative design and architecture by using different types of Pars firebricks, mix different colors of firebricks in a way that reflects your unique style.

Refractory brick facades have a high variety in color, size and design, and many creative designers, when implementing red refractory brick facades, use them randomly. Suitable as well as high adhesion in contact with mortar, it has different advantages compared to other materials in the installation and implementation stages. Red refractory bricks have a beautiful appearance due to the difference in style, design and color. They show

From a long time until today, the role of brick is resistance and protection, and architects should pay considerable attention in choosing high-quality materials to protect brick facades against various atmospheric, climatic, and other factors.

Ajernema Pars has made it possible for architects and engineers to safely choose their refractory bricks. It is not everyone’s job to create and build structures and buildings with brick facades that remain resistant and stable against wind, rain, heat and cold. Today, all over the world, cities need a resistant and professional facade, there are types of red refractory bricks, which have the best colors and designs and have attracted the attention and satisfaction of architects and engineers who are the first to speak.

Another beautiful and Iranian-friendly color of Pars refractory brick is red refractory brick or English brick, which starts from bright red with a little covering of black grains and ends in burnt red. Red firebrick can be presented separately according to the customer’s taste.

Red firebrick is a special color of firebrick, which is called red firebrick, which starts from pale red and reaches liver red (burnt).

The combination of this color spectrum (four colors) creates a very stylish and of course red color. Of course, depending on the taste of the designer or consumer, any color of red firebrick can be used separately or in different combinations. It should be noted that the combination of wood and red refractory brick is very beautiful and appropriate. Red firebrick is one of the most stylish types of firebrick for the facade.

What is Kazakh brick (clay brick)?

Kazakh brick facade: It is a type of traditional brick that is mixed with clay and ocher and is produced in a red color due to the heat set. It is lower than the first type of manufactured brick.

Kazakh brick became common in Iran since the time of the Cossacks and is made in a completely traditional way and has been used for thousands of years. The dimensions of its facade bricks are mostly 20×10 and its thickness is 5.5 and 4.5 square centimeters, and the brick floor is 20×20 and 25×25. It is worth mentioning that mostly in old Tehran, this type of brick was used for building.

Red brick facade Pars Brick Company, which has a dark and bright red color, is one of the most widely used materials in building construction, and in the past and now, this brick is used not only in the body and facade, but also in the skeleton of the building, and it makes the appearance of the building beautiful. be made

The traditional red brick is the most modern brick and has been produced for thousands of years, and today it is produced in the same traditional way in brick kilns, which has its own beauty and originality.

Clay brick, which is referred to by the same name as Kazakh brick and traditional brick, has been used for walls and facades of buildings in Iran since the distant past, and has its own special place in the city facades, and every person feels pleasure and warmth when seeing this type of facade. It feels good.

Pars brick has many properties and is currently used as the most widely used material in the building, which gives a special beauty to the building. Bricks have long been used in the construction industry in Iran. Bricks are used for interior, exterior, floors, stairs, etc.

Using traditional clay brick as the main face brick or using it as a paving stone in addition to creating a traditional, beautiful, warm and old environment allows you to repeat the good memories of the past. Many engineers and employers prefer to buy traditional adobe bricks in larger sizes and then by dividing them into smaller sizes, they reduce their brick purchase costs. Clay brick, which is known by the same names as Kazakh brick and traditional brick, has been used for walls and facades of buildings in Iran since the distant past, and it has its own special place in urban facades. it feels

In order to improve the quality of Kazakh brick, Pars brickwork has used the best soil mines in Tehran province and by grinding the soil, it has increased the quality and density of bricks, which is one of the best brick factories, Kazakh brickwork or traditional brickwork.

What is a normal brick facade?

One of the most widely used materials in the construction industry is ordinary brick. Red brick is one of the most widely used and high-quality types of ordinary bricks in brickwork and facade construction. The beauty and pattern obtained from the arrangement of red brick has caused the use of this brick in the internal and external facades of the building, giving a unique beauty and effect to the building.

The most common use of red bricks is in the external and internal facades of buildings, as well as for making paving stones. The combination of red brick with lighter and darker bricks gives a beautiful and unique effect to the facade of the building. Also, red brick increases the strength of the wall due to its holes. The holes in the brick allow the rebar to lock into the brick, which is very important for earthquake resistance.

brick facade of Pars company offers all kinds of red bricks with the best quality, including no scaling, low water absorption percentage, frost resistance, no cracking, etc.

The price of the red brick of brick facade of Pars company is very reasonable and according to the current rate, and we have always tried to offer our products while maintaining quality and originality at reasonable prices for buyers.